how-to icon

How to Use

M1
Smart-Kill Wi-Fi Electronic Mouse Trap

Trap/App Setup

  1. Check that the unit is turned OFF by making sure the power button is not pressed down. Bait the trap before inserting batteries. Rodents prefer foods that are high in protein and fat. Try using peanut butter, hazelnut spread, chocolate and meats such as bacon or beef jerky. Be careful not to use too much. Rodents have a very strong sense of smell, so only a small amount of bait is needed to attract them to the trap. Open the kill chamber door to access the bait cup, which can be found on the floor of the trap, furthest from the rodent entrance. Use a cotton swab, toothpick, tweezers or similar tool to place bait so that your scent is not transferred to the trap.
  2. Insert 4 brand new “AA” batteries. Place your trap anywhere indoors. The best place for a trap is on a flat surface against a wall where you have seen signs of rodent activity. The trap should be placed lengthwise with the rodent entrance nearest to the wall. Make sure your trap is within range of your Wi-Fi signal. Do this by first checking that your Wi-Fi is on and working properly. Use a device that has already connected to the Wi-Fi network such as a mobile device or tablet and check the signal strength where the trap is placed.
  3. Download the free Victor® Pest App from the Apple App Store® or Android Google Play™ store. Connect your trap by following the instructions on screen or by following along below. It is important to note that some screens, instructions and settings may differ slightly depending on the type of device you are using.

Android Devices

  1. PRESS POWER BUTTON. Press the power button to turn the trap ON. The Victor® “V” will blink green 3 times.
  2. PRESS AND HOLD WI-FI BUTTON FOR 5 SECONDS. The Wi-Fi button will blink blue 10 times while the trap is connecting.
  3. SCAN TRAP CODE. Center the trap’s code in the window on the screen. The trap code is the QR code located on the bottom of your mouse trap. If you have trouble scanning the code, try changing the distance between the trap and the mobile device. Alternatively you can enter the 15 digit alphanumeric code manually by pressing the “ENTER CODE MANUALLY” text found on the bottom of the screen. Enter the serial number found next to the QR code on your trap.
  4. CONNECT MOBILE DEVICE TO TRAP. Go to Wi-Fi settings on your device by pressing the red “GO TO SETTINGS” button. Select the trap, which is VICTOR following by 15 alphanumeric digits. (Ex: VICTOR-WM170818BE00004). Press “CONNECT”, then press the back button.
  5. CONNECT TRAP TO WI-FI. Select the Wi-Fi network to connect the trap to. Enter the network password for the Wi-Fi network, then press the red “CONNECT” button. It may take up to 1 minute to connect.
  6. CONNECTED. A notification appears when the trap successfully connects. Press the red “NEXT” button and continue to step number 8.
  7. UNABLE TO CONNECT. If your trap did NOT successfully connect, go to the Settings menu of your mobile device, then select the Wi-Fi option. Select more options (often can be found by pressing the options button in the top right corner) then select “Saved Networks”. Find the trap name (Ex: VICTOR-WM170818BE00004) and select it. Select “FORGET”. Power the trap off, then repeat steps 1 through 7. If the trap still does not connect, visit the Troubleshooting section or call 1-855-5-VICTOR for immediate assistance.
  8. NAME YOUR TRAP. After successful connection, name the trap and press the red “NEXT” button.
  9. BAIT AND PLACE TRAP. Swipe through the three instruction screens on baiting and placing the trap, then press the red “DONE” button.
  10. MONITOR TRAP. Stay up to date on trap activity from anywhere via your mobile device.

iOS Devices

  1. PRESS POWER BUTTON. Press the power button to turn the trap ON. The Victor® “V” will blink green 3 times.
  2. PRESS AND HOLD WI-FI BUTTON FOR 5 SECONDS. The Wi-Fi button will blink blue 10 times while the trap is connecting.
  3. SCAN TRAP CODE. Center the trap’s code in the window on the screen. The trap code is the QR code located on the bottom of your mouse trap. If you have trouble scanning the code, try changing the distance between the trap and the mobile device. Alternatively you can enter the 15 digit alphanumeric code manually by pressing the “ENTER CODE MANUALLY” text found on the bottom of the screen. Enter the serial number found next to the QR code on your trap.
  4. CONNECT MOBILE DEVICE TO TRAP. Go to Wi-Fi settings on your device by pressing the red “GO TO SETTINGS” button. Select the trap, which is VICTOR following by 15 alphanumeric digits. (Ex: VICTOR-WM170818BE00004). Press the back button on the device’s top menu bar to return to the Victor® App.
  5. CONNECT TRAP TO WI-FI. Press the red “NEXT” button to go to Wi-Fi settings. Choose the Wi-Fi network you would like your trap to connect to. Enter the network password for the Wi-Fi network, then press the red “SUBMIT” button.
  6. RECONNECT MOBILE DEVICE TO WI-FI. Go to the Wi-Fi settings on your device by pressing the red “GO TO SETTINGS” button. Choose a Wi-Fi network. Most devices will automatically reconnect to the most recently selected Wi-Fi network. If it does not, select it. Then press the back button on the phone’s top menu bar to return to the Victor® App. Press the red “NEXT” button. It may take up to 1 minute to connect.
  7. CONNECTED. A notification appears when the trap successfully connects. Press the red “NEXT” button and continue to step number 9.
  8. CONNECTION ERROR. If your trap did NOT successfully connect, click “Connection Help” on screen, visit the Troubleshooting section or call 1-855-5-VICTOR for immediate assistance.
  9. NAME YOUR TRAP. After successful connection, name the trap and press the red “NEXT” button.
  10. BAIT AND PLACE TRAP. Swipe through the three instruction screens on baiting and placing the trap, then press the red “DONE” button.
  11. MONITOR TRAP. Stay up to date on trap activity from anywhere via your mobile device.

Baiting

  1. Be sure that the trap is powered OFF and batteries are removed before baiting the trap.
  2. Rodents prefer foods that are high in protein and fat. Try using peanut butter, hazelnut spread, chocolate and meats such as bacon or beef jerky. Be careful not to use too much. Rodents have a very strong sense of smell, so only a small amount of bait is needed to attract them to the trap.
  3. Open the kill chamber door to access the bait cup, which can be found on the floor of the trap, furthest from the rodent entrance.
  4. Use a cotton swab, toothpick, tweezers or similar tool to place bait so that your scent is not transferred to the trap.

Disposal - How do I dispose of a caught mouse?

  1. Press the power button to turn the unit OFF.
  2. Remove the batteries. Open the kill chamber door and properly discard rodent.
  3. Clean and bait the trap after each use for most effective results.
  4. Insert batteries and press the power button to turn the unit back on.
  5. The trap will automatically reconnect to Wi-Fi. Opening and closing the kill chamber door will re-arm the mouse trap if it has not been powered OFF.
Apple Store Google Play Download the free Victor® Pest app and get connected
  User Manual Icon

User Manual

Download PDF »
 
FAQs icon FAQs »
 
Cleaning icon Cleaning »
  Canada

Visit Our
Canadian Store